Note：Generally the FULL U and ZERO U do not need to set. ZERO U-zero voltage setting：when the voltage is lower than it the percentage will be 0%, backlight off, if you keep discharge the LCD flicker, the alarm indicator display and buzzer warning；Īlarm-alarm setting：when the capacity is lower than it the LCD flicker and buzzer warning. Click the “up” or“down” key to select the setting items:ĬAP-capacity setting：an initial capacity has been set at the factory, please set it according to the real capacity；įULL U-full voltage setting：when the voltage is higher than it the percentage will be 100%；.Press the “OK” key for 3s to enter the setting menu.If you want to extend the shielded wire, you must use 4 lines of the same specification. The sampler must be connected to the negative circuit, it is forbidden to connect to the positive circuit. Finally, connect the sampler to the indicator by the shielded wire.Īttention: Please connect as shown strictly.The B- of sampler connects to B- of battery.Another end connects to B+ of sampler (anyone is ok).
One end of the ordinary wire connects to B+ of battery.Prepare a shielded wire and an ordinary wire (0.3-0.75 mm²).
#Lead acid battery monitor install#
0 kommentar(er)
